Benchdog Tools Ultra MFT Corner Feet (Physical Product)
Raise your BenchDog Tools Ultra MFT Workstation of a cabinet or workbench with these smart looking corner feet. While designed around the BenchDog Ultra MFT, these feet are also compatible with any 4040 profile with a 10mm slot.
Dimensions:
Width: 160mm
Length: 160mm
Height: 82mm
Weight (4 feet) 900g
The key consideration in the design of the feet was to match the bench height of a FESTOOL MFT/3 when its legs were folded and the unit situated on a cabinet or low-bench within a workshop set-up. Additionally, the design allows for the feet to remain attached to the bench with sufficient clearance for the legs to be lowered and secured without any modification to the bench.
Included
2 x Corner Feet (Plain)
2 x Corner Feet (Strawbyte branded)
16 x M8 Spring Tee Nuts, 10mm slot
16 x M8 Bolts, 20mm length
2 x Bench Locating Pegs (fixings for customer to provide)
Raise your BenchDog Tools Ultra MFT Workstation of a cabinet or workbench with these smart looking corner feet. While designed around the BenchDog Ultra MFT, these feet are also compatible with any 4040 profile with a 10mm slot.
Dimensions:
Width: 160mm
Length: 160mm
Height: 82mm
Weight (4 feet) 900g
The key consideration in the design of the feet was to match the bench height of a FESTOOL MFT/3 when its legs were folded and the unit situated on a cabinet or low-bench within a workshop set-up. Additionally, the design allows for the feet to remain attached to the bench with sufficient clearance for the legs to be lowered and secured without any modification to the bench.
Included
2 x Corner Feet (Plain)
2 x Corner Feet (Strawbyte branded)
16 x M8 Spring Tee Nuts, 10mm slot
16 x M8 Bolts, 20mm length
2 x Bench Locating Pegs (fixings for customer to provide)
Raise your BenchDog Tools Ultra MFT Workstation of a cabinet or workbench with these smart looking corner feet. While designed around the BenchDog Ultra MFT, these feet are also compatible with any 4040 profile with a 10mm slot.
Dimensions:
Width: 160mm
Length: 160mm
Height: 82mm
Weight (4 feet) 900g
The key consideration in the design of the feet was to match the bench height of a FESTOOL MFT/3 when its legs were folded and the unit situated on a cabinet or low-bench within a workshop set-up. Additionally, the design allows for the feet to remain attached to the bench with sufficient clearance for the legs to be lowered and secured without any modification to the bench.
Included
2 x Corner Feet (Plain)
2 x Corner Feet (Strawbyte branded)
16 x M8 Spring Tee Nuts, 10mm slot
16 x M8 Bolts, 20mm length
2 x Bench Locating Pegs (fixings for customer to provide)