Cable Clip for 33/34mm OD Vacuum/Dust Extractor Hose (Set of 6)
For hoses that measure between 33m and 34mm outside diameter.
The clips have an internal diameter of 33.5mm making it suitable for the smaller diameter Festool hose.
Please check your hose carefully and contact us if you don’t see your size listed.
This cleverly designed and simple to use clip allows you to attach your tool power cord to your dust extraction hose, It keeps everything neat and tidy when the tool is in use.
The clever design allows you to clip the power cable in two ways. Use the outside clip for mains leads up to 7.5 millimeters and you can unclip the tool from the hose easily leaving the clip attached to the hose. For slightly larger cables you have the option of using the inside clip or for a more permanent configuration. You choose.
It has been tested on Makita and Festool plunge saws (Track saw) and helps prevent snagging during the cut. But it is equally suited to any tool which uses a shop vac or dust extractor to remove dust from a tool, especially when using the power take-off or auto start feature.
Also you can connect your jobsite mitre saw, Festool Domino, biscuit jointer, router or table saw and keep your power cable and hose neatly together.
Maximum Cable Diameter
Outside clip: 7.5 mm
Inside Clip: 8.0mm
Material: 100% PETG
Manufacturing Method: FDM Printing
For hoses that measure between 33m and 34mm outside diameter.
The clips have an internal diameter of 33.5mm making it suitable for the smaller diameter Festool hose.
Please check your hose carefully and contact us if you don’t see your size listed.
This cleverly designed and simple to use clip allows you to attach your tool power cord to your dust extraction hose, It keeps everything neat and tidy when the tool is in use.
The clever design allows you to clip the power cable in two ways. Use the outside clip for mains leads up to 7.5 millimeters and you can unclip the tool from the hose easily leaving the clip attached to the hose. For slightly larger cables you have the option of using the inside clip or for a more permanent configuration. You choose.
It has been tested on Makita and Festool plunge saws (Track saw) and helps prevent snagging during the cut. But it is equally suited to any tool which uses a shop vac or dust extractor to remove dust from a tool, especially when using the power take-off or auto start feature.
Also you can connect your jobsite mitre saw, Festool Domino, biscuit jointer, router or table saw and keep your power cable and hose neatly together.
Maximum Cable Diameter
Outside clip: 7.5 mm
Inside Clip: 8.0mm
Material: 100% PETG
Manufacturing Method: FDM Printing
For hoses that measure between 33m and 34mm outside diameter.
The clips have an internal diameter of 33.5mm making it suitable for the smaller diameter Festool hose.
Please check your hose carefully and contact us if you don’t see your size listed.
This cleverly designed and simple to use clip allows you to attach your tool power cord to your dust extraction hose, It keeps everything neat and tidy when the tool is in use.
The clever design allows you to clip the power cable in two ways. Use the outside clip for mains leads up to 7.5 millimeters and you can unclip the tool from the hose easily leaving the clip attached to the hose. For slightly larger cables you have the option of using the inside clip or for a more permanent configuration. You choose.
It has been tested on Makita and Festool plunge saws (Track saw) and helps prevent snagging during the cut. But it is equally suited to any tool which uses a shop vac or dust extractor to remove dust from a tool, especially when using the power take-off or auto start feature.
Also you can connect your jobsite mitre saw, Festool Domino, biscuit jointer, router or table saw and keep your power cable and hose neatly together.
Maximum Cable Diameter
Outside clip: 7.5 mm
Inside Clip: 8.0mm
Material: 100% PETG
Manufacturing Method: FDM Printing
